24-hour hot line:+86 189 1133 7382
GREEN  SAFETY  RELIABLE  EFFICIENT
sales@auwii.com
​​Committed to laboratory sample pretreatment and safety protection equipment R&D and manufacturing
  • Concentration Equipment
    ❤ 收藏
  • Concentration Equipment

    Array rotary evaporator is an innovative pre-treatment device that can concentrate multi-sample at same time. It is composed of Multiple miniRotar unit, Vacuum System and Solvent Recovery unit, which can greatly save the space and improve the experiment efficiency.

    • ¥0.00
      ¥0.00
      ¥0.00
      ¥0.00
      ¥0.00
    • 满意度:

      成交: 0 次

      评论: 0 次

    重量:0.00KG
    • 数量:
    • (库存99999)
商品描述

Array rotary evaporator is an innovative pre-treatment device that can concentrate multi-sample at same time. It is composed of Multiple miniRotar unit, Vacuum System and Solvent Recovery unit, which can greatly save the space and improve the experiment efficiency.


Array rotary evaporator is an innovative pre-treatment device that can concentrate multi-sample at same time. It is composed of Multiple miniRotar unit, Vacuum System and Solvent Recovery unit, which can greatly save the space and improve the experiment efficiency.

The miniRotars can work simultaneously, or operate independently. Each can set it's own temperature, adjust speed, release vacuum etc., without interfering other rotary evaporator units.





Extreme mini —— Saves Space
○ MiniRotar designs longitudinal rotating axis innovatively, reducing the product width to 25cm,
which is one third of traditional rotary evaporator. 1.8m standard fume hood can put up to 5 miniRotars,  fully save the fume hood space.

Array Combination —— Improves Efficiency
○ Special connector design can keep multiple units working in parallel, sharing one Vacuum system  and one Recovery system. Highly recommended on processing multiple samples at the same time to improve work efficiency.
○ Each miniRotar can set it's own temperature, rotation speed and time, and can independently lift and  lower the flask. MiniRotar 500s equips an independent quick release vacuum button,  which can release the vacuum independently without interfering other rotary evaporator units.

Timing of evaporation —— Less Attention
○ MiniRotar500s can setting it’s working time according to users experience. Once time is up, miniRotar500s will automatically stop rotating and release vacuum, lift the flask to part from  water bath, and automatically stop sample evaporation and concentration.

Double Protection —— Avoid Contamination
○ MiniRotar is equipped with a backflow prevention connector, which can avoid contamination of samples and ensure the accuracy of analysis results.


Rotary Evaporator


Specification
miniRotar500 miniRotar500s
Temperature range Room temperature to 95℃ Room temperature to 95℃
Control accuracy ±1℃ ±1℃
Temperature setting
 and display
Quick setting of knob, digital display
 of target temperature and 
real-time temperature.
Quick setting of knob, 
digital display of target temperature 
and real-time temperature.
Dry burn protection Automatic power off for dry firing Automatic power off for dry firing
Heating mode Concealed heating Concealed heating
※ Direction of rotation axis Longitudinal set Longitudinal set
Rotation parameter setting TFT4.3 "touch LCD screen TFT4.3 "touch LCD screen
Rotary flask raise and drop mode Manual and automatic dual mode Manual and automatic dual mode
Timing function N/A Yes.
(Time can be set within 0-999min. 
Once times up,the flask will stop rotating and
 automatically rise out of the bath. Meanwhile, 
the vacuum will be released and 
the sample will stop evaporating.)
Rotary flask 500mL 500mL
Flask interface specification Standard 24/29 interface Standard 24/29 interface
※ Rotation mode Clockwise rotation Clockwise, counterclockwise and 
clockwise rotate three modes alternately.
※Vacuum release mode Manual valve release vacuum Quick button to release vacuum
(when multiple groups are used in 
parallel, release the
 vacuum of one group of rotary evaporator, 
others works normally.)
Turn off the power
N/A Yes.
Sample observation lamp USB led lights USB led lights
Extraction interface φ10mm Pagoda-Shape Connector φ10mm Pagoda-Shape Connector
Communication interface N/A RS485
Power supply AC220V 50/60Hz AC220V 50/60Hz
Input power 700W 700W
Overall dimensions
L(530mm)W(250mm)H(520mm)


Acuum Pump


Specification eV35 eV35s
Vacuum pump type
High performance diaphragm
vacuum pump.

Germany diaphragm 
vacuum pump

Diaphragm material
PTFE
PTFE
Pump head material
PTFE
PTFE
Ultimate vacuum
8mbar
8mbar
Maximum pumping speed
35L/min
34L/min
Gas connector
φ10mm Pagoda-Shape Connector
φ10mm Pagoda-Shape Connector
Vacuum gauge
Pointer vacuum gauge
Pointer vacuum gauge
Vacuum regulating valve
Precision hand - screwed
 vacuum control valve

Precision hand - screwed 
vacuum control valve

Vacuum adjustment range
–0.1-0Mpa
–0.1-0Mpa
Power supply
AC220V   50/60Hz
AC220V   50/60Hz
Input power
240W
245W
Maximum load
Up to 6 mini rotary 
evaporator units to connect

Up to 6 mini rotary
evaporator units to connect

Overall dimensions
L(350mm)W(170mm)H(350mm)


Vacuum Controller


Specification eC35 eC35s
Vacuum control range
20-1050mbar
10-1050mbar
Vacuum setting accuracy
1mbar
1mbar
Vacuum control accuracy
5mbar
2mbar
Display
inch TFT touch screen
inch TFT touch screen
Vacuum sensor type
316 stainless steel
AL2O3 ceramics
Material of contact
316 stainless steel
PEEK、PTFE、Perfluoroether rubber、PFA
Vacuum pump power control
N/A
ON/OFF can be controlled of the vacuum pump
Communication interface
N/A
RS485
Gas connector
316ss φ10mm 
Pagoda-Shape Connector

PEEK φ10mm 
Pagoda-Shape Connector

Power supply
AC100-230V,50/60Hz
AC100-230V,50/60Hz
Overall dimensions
L(240mm)W(160mm)H(170mm)


Solvent Recovery Unit


Specification eSR220s eSR320s
Condense stage
Three stages
Three stages
Lowest temperature
-20℃
-20℃
Collection bottles
One
Two
Collection bottle Volume
1000ml
3000ml
Condensing pipeline ring material
Special material
(Resistance to chloride)

Special material
(Resistance to chloride)

Inlet interface specification
PEEK φ10mm 
Pagoda-Shape Connector

PEEK φ13mm 
Pagoda-Shape Connector

Outlet interface specification
PEEK φ10mm 
Pagoda-Shape Connector

PEEK φ12mm 
Pagoda-Shape Connector

Power supply
AC220V 50Hz
AC220V 50Hz
Overall dimensions
L(510mm)W(240mm)H(682mm)
L(510mm)W(340mm)H(710mm)


Glass Condenser


Specification GL1000
Material
High borosilicate glass
Extraction connector
φ10mm Pagoda-Shape Connector
Water connector
φ10mm Pagoda-Shape Connector
Collection bottle Volume
1000ml
Condensing tube surface area
0.2㎡
Fixed method

Glass condenser can be directly suspended on shelf side of V35, 
V35s vacuum pump.
T series chiller is also equipped with mounting interface, 
which can directly suspend the glass condenser.

Material
High borosilicate glass
Extraction interface φ10mm Pagoda-Shape Connector


Chiller

Specification
T4
T4α
T4β
Temperature Range
5-35℃
-10-35℃
-20-35℃
Temperature Stability
±0.1℃
±0.1℃
±0.1℃
Cooling Capacity
1600W @20℃
1500W @20℃
1200W @20℃
Reservoir Volume
8L
8L
8L
Overall dimensions
490×246×790
490×246×790
490×246×790

Specification
T3
T3α
T3β
Temperature Range
5-35℃
-10-35℃
-20-35℃
Temperature Stability
±0.1℃
±0.1℃
±0.1℃
Cooling Capacity
1200W @20℃
1000W @20℃
800W @20℃
Reservoir Volume
7L
7L
7L
Overall dimensions
460×210×660
460×210×660
460×210×660

Specification
T2
T2α
T2β
Temperature Range
5-35℃
-10-35℃
-20-35℃
Temperature Stability
±0.1℃
±0.1℃
±0.1℃
Cooling Capacity
700W @20℃
600W @20℃
500W @20℃
Reservoir Volume
5L
5L
5L
Overall dimensions
410×210×560
410×210×560
410×210×560

Specification
T1
T1α

Temperature Range
5-35℃
-10-35℃

Temperature Stability
±0.1℃
±0.1℃

Cooling Capacity
450W @20℃
300W @20℃

Reservoir Volume
3L
3L

Overall dimensions
350×176×550
350×176×550



main feature:


○Extreme Mini——Save space


    MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.


○Array combination-improve efficiency


    The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
    Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.


○Timed work-reduce nursing


    The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.


○Double protection-avoid pollution


    The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:


○Extreme Mini——Save space


    MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.


○Array combination-improve efficiency


    The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
    Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.


○Timed work-reduce nursing


    The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.


○Double protection-avoid pollution


    The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:


○Extreme Mini——Save space


    MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.


○Array combination-improve efficiency


    The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
    Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.


○Timed work-reduce nursing


    The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.


○Double protection-avoid pollution


    The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:


○Extreme Mini——Save space


    MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.


○Array combination-improve efficiency


    The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
    Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.


○Timed work-reduce nursing


    The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.


○Double protection-avoid pollution


    The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
  • 购买人 会员级别 数量 属性 购买时间
  • 商品满意度 :
暂无评价信息
inquiry