GREEN  SAFETY  RELIABLE  EFFICIENT
24-hour hot line:+86 189 1133 7382
sales@auwii.com
​​Committed to laboratory sample pretreatment and safety protection equipment R&D and manufacturing
TECHNICAL SUPPORT
How to maintain the water tower of an industrial chiller
source: | Author:AUWII | time :2020-12-16 | 193 Browse: | Share:
Industrial chillers are refrigeration equipment, so how to maintain the water tower of industrial chillers?

Industrial chillers are refrigeration equipment, so how to maintain the water tower of industrial chillers?

First of all, after the stainless steel water tower is used, the components such as the hose should be cleaned first. Pay special attention to remove the grease on the pump and the soil in the concave part of the liquid tank. Especially after spraying a highly corrosive pesticide such as Bordeaux mixture, it is best to soak it in alkaline water for 1-2 hours. Be careful to prevent rust. All parts that can be removed must be removed and cleaned. The inner wall of the spray bar and the spray head should be smeared with oil to protect it from rust.

Next, check each connection for leaks. When using, first install the water pipe to try and then install other things. When adding water, first ensure that the stainless steel water tower is unobstructed, and the liquid level cannot exceed the safe water level line. Before use, open the water tower in advance, so that the air pressure in the barrel rises to the working pressure to ensure smooth water flow.

Finally, the core components of electric sprayers are pumps and batteries. Although there are several kinds of pumps on the market, these pumps are afraid of blockage. Therefore, it is necessary to use clean water to rush the medicine. When adding water, it must be filtered with a small filter to prevent clogging.