24-hour hot line:+86 189 1133 7382
GREEN  SAFETY  RELIABLE  EFFICIENT
sales@auwii.com
​​Committed to laboratory sample pretreatment and safety protection equipment R&D and manufacturing
  • mini500s Rotary Evaporator
    ❤ 收藏
  • mini500s Rotary Evaporator

    Array rotary evaporator is an innovative pre-processing equipment that can simultaneously concentrate and process multiple samples. It consists of multiple miniRotar rotary evaporator units, a vacuum system, and a solvent condensation recovery system. It can greatly improve the experiment while realizing multiple sample processing. Room space utilization.

    • ¥0.00
      ¥0.00
      ¥0.00
      ¥0.00
    • 满意度:

      销量: 0

      评论: 0 次

    重量:0.00KG
    • 数量:
商品描述

Array rotary evaporator is an innovative pre-processing equipment that can simultaneously concentrate and process multiple samples. It consists of multiple miniRotar rotary evaporator units, a vacuum system, and a solvent condensation recovery system. It can greatly improve the experiment while realizing multiple sample processing. Room space utilization.


Array rotary evaporator is an innovative pre-processing equipment that can simultaneously concentrate and process multiple samples. It consists of multiple miniRotar rotary evaporator units, a vacuum system, and a solvent condensation recovery system. It can greatly improve the experiment while realizing multiple sample processing. Room space utilization.

The multiple miniRotars equipped in the array rotary evaporator can be used at the same time and support independent operation. They can independently perform temperature setting, rotation speed adjustment, and vacuum release without interfering with the normal operation of other rotary evaporator units.





main feature:


○Extreme Mini——Save space


    MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.


○Array combination-improve efficiency


    The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
    Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.


○Timed work-reduce nursing


    The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.


○Double protection-avoid pollution


    The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:


○Extreme Mini——Save space


    MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.


○Array combination-improve efficiency


    The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
    Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.


○Timed work-reduce nursing


    The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.


○Double protection-avoid pollution


    The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:


○Extreme Mini——Save space


    MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.


○Array combination-improve efficiency


    The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
    Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.


○Timed work-reduce nursing


    The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.


○Double protection-avoid pollution


    The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:


○Extreme Mini——Save space


    MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.


○Array combination-improve efficiency


    The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
    Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.


○Timed work-reduce nursing


    The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.


○Double protection-avoid pollution


    The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:

Extreme mini —— Saves Space
○ MiniRotar designs longitudinal rotating axis innovatively, reducing the product width to 25cm,
which is one third of traditional rotary evaporator. 1.8m standard fume hood can put up to 5 miniRotars,  fully save the fume hood space.

Array Combination —— Improves Efficiency
○ Special connector design can keep multiple units working in parallel, sharing one Vacuum system  and one Recovery system. Highly recommended on processing multiple samples at the same time to improve work efficiency.
○ Each miniRotar can set it's own temperature, rotation speed and time, and can independently lift and  lower the flask. MiniRotar 500s equips an independent quick release vacuum button,  which can release the vacuum independently without interfering other rotary evaporator units.

Timing of evaporation —— Less Attention
○ MiniRotar500s can setting it’s working time according to users experience. Once time is up, miniRotar500s will automatically stop rotating and release vacuum, lift the flask to part from  water bath, and automatically stop sample evaporation and concentration.

Double Protection —— Avoid Contamination
○ MiniRotar is equipped with a backflow prevention connector, which can avoid contamination of samples and ensure the accuracy of analysis results.
Product parameters and model list:

Rotary evaporator


technical parameter miniRotar500 miniRotar500s
Heating temperature range Room temperature~95 Room temperature~95
Temperature control accuracy ±1 ±1
Temperature setting and display Knob to quickly set the target temperature and real-time temperature digital display Knob to quickly set the target temperature and real-time temperature digital display
Dry burn protection mode Automatic power off for dry burning Automatic power off for dry burning
heating method Concealed heating Concealed heating
※Rotation axis direction Portrait setting Portrait setting
Rotation parameter setting and display TFT4.3Inch touch LCD screen TFT4.3Inch touch LCD screen
Rotating screen lifting mode Manual and automatic dual mode Manual and automatic dual mode
※Timing function N/A
YES
(The time can be set within 0-999min. When the time is reached, the rotating bottle stops rotating.
Automatically lift out of the heating water bath and release the vacuum at the same time, the sample stops evaporating

Maximum volume of rotating bottle 500mL
500mL
Rotating bottle interface specifications standard 24/29 interface
standard 24/29 interface
※Rotation mode clockwise rotation
Three modes: clockwise counterclockwise clockwise and counterclockwise alternately
※Vacuum release method Manual switch valve to release vacuum
Shortcut button to release vacuum
    (When multiple groups are used in parallel, the vacuum of one group of rotary evaporators is released without affecting the normal operation of other rotary evaporators)
Turn off the power and automatically release the vacuum N/A YES
※Sample observation light USB interface led light
USB interface led light
Suction port φ10mm Pagoda connector
φ10mm Pagoda connector
Communication Interface RS485
voltage AC220V   50/60Hz
AC220V   50/60Hz
input power 700W
700W
Dimensions(mm)
deep 530×width 250×high 520


Vacuum pump


technical parameter eV35 eV35s
Vacuum pump type
High performance diaphragm vacuum pump
German original diaphragm vacuum pump
Diaphragm material
PTFE
PTFE
Pump head material
PTFE
PTFE
Ultimate vacuum
8mbar
8mbar
Maximum pumping speed
35L/min
34L/min
Pneumatic interface
φ10mm Pagoda connector
φ10mm Pagoda connector
Vacuum gauge
Pointer vacuum gauge
Pointer vacuum gauge
Vacuum control valve
Precision hand-tightened vacuum control valve
Precision hand-tightened vacuum control valve
Vacuum adjustment range
–0.1-0Mpa
–0.1-0Mpa
voltage
AC220V   50/60Hz
AC220V   50/60Hz
input power
240W
245W
Maximum load
Can be equipped with up to 6 sets of mini rotary evaporation units
Can be equipped with up to 6 sets of mini rotary evaporation units
Dimensions(mm)
deep 350×width 170×high 350


Vacuum controller


technical parameter eC35 eC35s
Vacuum degree control range
20-1050mbar
10-1050mbar
Vacuum setting accuracy
1mbar
1mbar
Vacuum degree control accuracy
5mbar
2mbar
Display screen
5 inch TFT touch screen
5 inch TFT touch screen
Vacuum control order
5
5
Material contact part material
316 stainless steel
PEEK、PTFE、Perfluoroether rubber、PFA
Vacuum pump power control
N/A
Can control the start/stop of the vacuum pump
Communication Interface
N/A
RS485
Pneumatic interface specifications
316 stainless steel φ10mm Pagoda connector
PEEK   φ10mm Pagoda connector
voltage
AC100-230V,50/60Hz
AC100-230V,50/60Hz
input power
50W
50W
Dimensions(mm)
deep 240×width 160×high170


Solvent recovery instrument


technical parameter eSR220s eSR320s
Condensation stages
Two levels
three levels
lowest temperature
-20℃
-20℃
Number of bottles collected
One
Two
Total volume of collection bottle
2000ml
3000ml
Condenser coil material
Special material
    (Able to withstand chloride ion attack)
Special material
    (Able to withstand chloride ion attack)
Pneumatic interface specifications
PEEK    φ10 Pagoda connector
PEEK    φ10 Pagoda connector
rated power
500W
500W
voltage
AC220V 50Hz
AC220V 50Hz
Dimensions(mm)
deep 510×width 240×high 660
deep 510×width 340×high 710


Glass condenser


technical parameter GL1000
Material
Borosilicate glass
Suction port
φ10mm Pagoda connector
Waterway interface
φ10mm Pagoda connector
Collection bottle volume
1000ml
Condenser tube surface area
0.2㎡
a fixed way

V35、V35sVacuum pump and T series

Cooling circulating water machines have GL1000 installation interface,

Can be easily suspended and fixed


  • 购买人 会员级别 数量 属性 购买时间
  • 商品满意度 :
暂无评价信息
inquiry