GREEN SAFETY RELIABLE EFFICIENT
24-hour hot line：+86 189 1133 7382
sales@auwii.com
Committed to laboratory sample pretreatment and safety protection equipment R&D and manufacturing
Description
Array rotary evaporator is an innovative pre-treatment device that can concentrate multi-sample at same time. It is composed of Multiple miniRotar unit, Vacuum System and Solvent Recovery unit, which can greatly save the space and improve the experiment efficiency.
Array rotary evaporator is an innovative pre-treatment device that can concentrate multi-sample at same time. It is composed of Multiple miniRotar unit, Vacuum System and Solvent Recovery unit, which can greatly save the space and improve the experiment efficiency.
The miniRotars can work simultaneously, or operate independently. Each can set it's own temperature, adjust speed, release vacuum etc., without interfering other rotary evaporator units.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
The miniRotars can work simultaneously, or operate independently. Each can set it's own temperature, adjust speed, release vacuum etc., without interfering other rotary evaporator units.
Extreme mini —— Saves Space
○ MiniRotar designs longitudinal rotating axis innovatively, reducing the product width to 25cm,
which is one third of traditional rotary evaporator. 1.8m standard fume hood can put up to 5 miniRotars, fully save the fume hood space.
Array Combination —— Improves Efficiency
○ Special connector design can keep multiple units working in parallel, sharing one Vacuum system and one Recovery system. Highly recommended on processing multiple samples at the same time to improve work efficiency.
○ Each miniRotar can set it's own temperature, rotation speed and time, and can independently lift and lower the flask. MiniRotar 500s equips an independent quick release vacuum button, which can release the vacuum independently without interfering other rotary evaporator units.
Timing of evaporation —— Less Attention
○ MiniRotar500s can setting it’s working time according to users experience. Once time is up, miniRotar500s will automatically stop rotating and release vacuum, lift the flask to part from water bath, and automatically stop sample evaporation and concentration.
Double Protection —— Avoid Contamination
○ MiniRotar is equipped with a backflow prevention connector, which can avoid contamination of samples and ensure the accuracy of analysis results.
○ MiniRotar designs longitudinal rotating axis innovatively, reducing the product width to 25cm,
which is one third of traditional rotary evaporator. 1.8m standard fume hood can put up to 5 miniRotars, fully save the fume hood space.
Array Combination —— Improves Efficiency
○ Special connector design can keep multiple units working in parallel, sharing one Vacuum system and one Recovery system. Highly recommended on processing multiple samples at the same time to improve work efficiency.
○ Each miniRotar can set it's own temperature, rotation speed and time, and can independently lift and lower the flask. MiniRotar 500s equips an independent quick release vacuum button, which can release the vacuum independently without interfering other rotary evaporator units.
Timing of evaporation —— Less Attention
○ MiniRotar500s can setting it’s working time according to users experience. Once time is up, miniRotar500s will automatically stop rotating and release vacuum, lift the flask to part from water bath, and automatically stop sample evaporation and concentration.
Double Protection —— Avoid Contamination
○ MiniRotar is equipped with a backflow prevention connector, which can avoid contamination of samples and ensure the accuracy of analysis results.
|
Rotary Evaporator |
||
 |
||
|
Specification |
miniRotar500 | miniRotar500s |
| Temperature range | Room temperature to 95℃ |
Room temperature to 95℃ |
| Control accuracy | ±1℃ |
±1℃ |
|
Temperature setting and display |
Quick setting of knob, digital display of target temperature and real-time temperature. |
Quick setting of knob, digital display of target temperature and real-time temperature. |
| Dry burn protection | Automatic power off for dry firing |
Automatic power off for dry firing |
| Heating mode | Concealed heating |
Concealed heating |
| ※ Direction of rotation axis | Longitudinal set |
Longitudinal set |
| Rotation parameter setting | TFT4.3 "touch LCD screen |
TFT4.3 "touch LCD screen |
| Rotary flask raise and drop mode | Manual and automatic dual mode |
Manual and automatic dual mode |
| Timing function | N/A |
Yes. (Time can be set within 0-999min. Once times up,the flask will stop rotating and automatically rise out of the bath. Meanwhile, the vacuum will be released and the sample will stop evaporating.) |
| Rotary flask | 500mL |
500mL |
| Flask interface specification | Standard 24/29 interface |
Standard 24/29 interface |
| ※ Rotation mode | Clockwise rotation |
Clockwise, counterclockwise and clockwise rotate three modes alternately. |
| ※Vacuum release mode | Manual valve release vacuum |
Quick button to release vacuum (when multiple groups are used in parallel, release the vacuum of one group of rotary evaporator, others works normally.) |
|
Turn off the power |
N/A | Yes. |
| Sample observation lamp | USB led lights |
USB led lights |
| Extraction interface | φ10mm Pagoda-Shape Connector |
φ10mm Pagoda-Shape Connector |
| Communication interface | N/A |
RS485 |
| Power supply | AC220V 50/60Hz |
AC220V 50/60Hz |
| Input power | 700W | 700W |
|
Overall dimensions |
L（530mm）W（250mm）H（520mm） | |
|
Acuum Pump |
||
 |
||
| Specification | eV35 | eV35s |
|
Vacuum pump type |
High performance diaphragm vacuum pump. |
Germany diaphragm vacuum pump |
|
Diaphragm material |
PTFE |
PTFE |
|
Pump head material |
PTFE |
PTFE |
|
Ultimate vacuum |
8mbar |
8mbar |
|
Maximum pumping speed |
35L/min |
34L/min |
|
Gas connector |
φ10mm Pagoda-Shape Connector |
φ10mm Pagoda-Shape Connector |
|
Vacuum gauge |
Pointer vacuum gauge |
Pointer vacuum gauge |
|
Vacuum regulating valve |
Precision hand - screwed vacuum control valve |
Precision hand - screwed vacuum control valve |
|
Vacuum adjustment range |
–0.1-0Mpa |
–0.1-0Mpa |
|
Power supply |
AC220V 50/60Hz |
AC220V 50/60Hz |
|
Input power |
240W |
245W |
|
Maximum load |
Up to 6 mini rotary evaporator units to connect |
Up to 6 mini rotary evaporator units to connect |
|
Overall dimensions |
L（350mm）W（170mm）H（350mm) |
|
|
Vacuum Controller |
||
 |
||
| Specification | eC35 |
eC35s |
|
Vacuum control range |
20-1050mbar |
10-1050mbar |
|
Vacuum setting accuracy |
1mbar |
1mbar |
|
Vacuum control accuracy |
5mbar |
2mbar |
|
Display |
5 inch TFT touch screen |
5 inch TFT touch screen |
|
Vacuum sensor type |
316 stainless steel |
AL2O3 ceramics |
|
Material of contact |
316 stainless steel |
PEEK、PTFE、Perfluoroether rubber、PFA |
|
Vacuum pump power control |
N/A |
ON/OFF can be controlled of the vacuum pump |
|
Communication interface |
N/A |
RS485 |
|
Gas connector |
316ss φ10mm Pagoda-Shape Connector |
PEEK φ10mm Pagoda-Shape Connector |
|
Power supply |
AC100-230V,50/60Hz |
AC100-230V,50/60Hz |
|
Overall dimensions |
L（240mm）W（160mm）H（170mm) |
|
| Solvent Recovery Unit | ||
 |
||
| Specification | eSR220s | eSR320s |
|
Condense stage |
Three stages |
Three stages |
|
Lowest temperature |
-20℃ |
-20℃ |
|
Collection bottles |
One |
Two |
|
Collection bottle Volume |
1000ml |
3000ml |
|
Condensing pipeline ring material |
Special material (Resistance to chloride) |
Special material (Resistance to chloride) |
|
Inlet interface specification |
PEEK φ10mm Pagoda-Shape Connector |
PEEK φ13mm Pagoda-Shape Connector |
|
Outlet interface specification |
PEEK φ10mm Pagoda-Shape Connector |
PEEK φ12mm Pagoda-Shape Connector |
|
Power supply |
AC220V 50Hz |
AC220V 50Hz |
|
Overall dimensions |
L（510mm）W（240mm）H（682mm) |
L（510mm）W（340mm）H（710mm) |
|
Glass Condenser |
|
 |
|
| Specification | GL1000 |
|
Material |
High borosilicate glass |
|
Extraction connector |
φ10mm Pagoda-Shape Connector |
|
Water connector |
φ10mm Pagoda-Shape Connector |
|
Collection bottle Volume |
1000ml |
|
Condensing tube surface area |
0.2㎡ |
|
Fixed method |
Glass condenser can be directly suspended on shelf side of V35, |
|
Material |
High borosilicate glass |
| Extraction interface |
φ10mm Pagoda-Shape Connector |
|
Chiller |
|||
 |
|||
|
Specification |
T4 |
T4α |
T4β |
|
Temperature Range |
5-35℃ |
-10-35℃ |
-20-35℃ |
|
Temperature Stability |
±0.1℃ |
±0.1℃ |
±0.1℃ |
|
Cooling Capacity |
1600W @20℃ |
1500W @20℃ |
1200W @20℃ |
|
Reservoir Volume |
8L |
8L |
8L |
|
Overall dimensions |
490×246×790 |
490×246×790 |
490×246×790 |
|
|
|||
|
Specification |
T3 |
T3α |
T3β |
|
Temperature Range |
5-35℃ |
-10-35℃ |
-20-35℃ |
|
Temperature Stability |
±0.1℃ |
±0.1℃ |
±0.1℃ |
|
Cooling Capacity |
1200W @20℃ |
1000W @20℃ |
800W @20℃ |
|
Reservoir Volume |
7L |
7L |
7L |
|
Overall dimensions |
460×210×660 |
460×210×660 |
460×210×660 |
|
|
|||
|
Specification |
T2 |
T2α |
T2β |
|
Temperature Range |
5-35℃ |
-10-35℃ |
-20-35℃ |
|
Temperature Stability |
±0.1℃ |
±0.1℃ |
±0.1℃ |
|
Cooling Capacity |
700W @20℃ |
600W @20℃ |
500W @20℃ |
|
Reservoir Volume |
5L |
5L |
5L |
|
Overall dimensions |
410×210×560 |
410×210×560 |
410×210×560 |
|
|
|||
|
Specification |
T1 |
T1α |
— |
|
Temperature Range |
5-35℃ |
-10-35℃ |
— |
|
Temperature Stability |
±0.1℃ |
±0.1℃ |
— |
|
Cooling Capacity |
450W @20℃ |
300W @20℃ |
— |
|
Reservoir Volume |
3L |
3L |
— |
|
Overall dimensions |
350×176×550 |
350×176×550 |
— |
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
main feature:
○Extreme Mini——Save space
MiniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.
○Array combination-improve efficiency
The special interface design of miniRotar allows multiple units to be used in parallel, sharing a vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples and improves work efficiency.
Each miniRotar can independently set working parameters such as temperature, speed, time, etc., and can independently raise and lower the sample bottle. miniRotar 500s has an independent quick release vacuum button, which can release vacuum independently without affecting the normal operation of other miniRotars.
○Timed work-reduce nursing
The miniRotar500s has the ability to work regularly. You can set the working conditions and working time according to experience. After the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, lift the sample bottle out of the heating water bath, and automatically stop the evaporation and concentration of the sample.
○Double protection-avoid pollution
The miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contamination of the sample, and ensure the accuracy of the analysis results.
- User name Member Level Quantity Specification Purchase Date
Total 0 Record
- Satisfaction ：
-
No evaluation information
- Temperature Control Equipment
- Lab Chiller
- Analytic Instrument chiller
- Industry Chiller
- Water cooled chiller
- Chillers Accessory
- New energy vehicle Temperature Control Equipment
- Concentration Equipment
- Array Rotary Evaporator
- miniRotary Evaporator
- Electrothermal Digestor
- Graphite Digestor
- Acid Evaporator
- Hair Graphite Digestor
- Green Lab Solution
- Solvent safety cap
- Waste Safety Cap
- Safety Funnel
- Solvent Collector
- Desk type Safety Funnel
- Waste collect System
- Secondary Vessel
- Distillation equipment
- Array Fames
- Airsource Equipment
- Oilless air compressor
Navigation
Tel: +86 10 8178 9901 / 9902
Fax: +86 10 8178 7012 / 7013
Mob:+86 189 1133 7382
E-MAIL:sales@auwii.com
Add:4-203, Hongfu International Innovation Center,
ChangPing, Beijing, China 102209
Auwii Instrument Co. Ltd.
Just waiting for you！
LINK
- No data
Application
Copyright © Auwii Instrument Co. Ltd. All Rights Reserved.
Find more info from