Beijing Aowei Instrument Laboratory Waste Collection System is our green laboratory series solutions. This series of solutions includes three parts: solvent safety bottle caps, intubation type/funnel type laboratory waste collection devices, etc. The main ones are In order to protect the laboratory environment and the health of laboratory personnel, the volatilization of chromatographic mobile phase and the volatilization of waste liquid in the laboratory environment are one of the main sources of laboratory air pollution.

Solvent safety bottle cap

SE series solvent safety bottle caps efficiently filter dust in the air, prevent mobile phase contamination, and ensure the accuracy of analysis results; when the chromatographic instrument stops working, it prevents the mobile phase from volatilizing out through the air inlet to protect the laboratory environment from pollution.

microporous membrane-high efficiency filtration

SE series solvent safety bottle caps have a built-in PTFE microporous filter membrane to efficiently filter the air entering the mobile phase bottle to prevent dust from polluting the solvent and ensure the accuracy of the analysis results;

One-way seal-prevent volatilization

SE series solvent safety bottle caps use a high-sensitivity one-way safety valve. When the chromatographic instrument stops working, the safety valve is closed and sealed to prevent the solvent in the bottle from volatilizing outward, protect the laboratory environment and the health of the experimenters;

Time tag-due reminder

When the SE series solvent safety bottle cap is used, press the time start button on the safety valve, and the time label will record the time of use in the form of a red progress bar, reminding the user to replace the safety valve on schedule;

plug-in installation-easy to replace

The safety valve on the SE series solvent safety bottle cap is recommended to be replaced after 6 months of use. The safety valve adopts a quick plug-in installation design, which can be replaced by the user;

Waste liquid collection device

Intubation type waste liquid collection device

Intubation type waste liquid collection device is used for collecting waste liquid discharged from laboratory equipment. The exhaust gas filter can efficiently adsorb harmful gases to protect the laboratory environment and the health of the experimenters. Rechargeable liquid level alarm to prevent liquid overflow. Various types of secondary containers prevent secondary pollution and meet regulatory requirements.

Rich interfaces-easy to connect

Intubation type waste liquid collection device can be connected with φ4-φ8mm inner diameter hose, or φ1.6-φ3.2 outer diameter hard pipe, or customized according to customer needs.

High efficiency filtration-protect the environment

According to the type of waste liquid, an organic waste gas filter and an acid waste gas filter can be selected to efficiently adsorb and filter the overflowing waste gas to protect the ambient air from being polluted. When starting to use, press the time start button on the filter, the time label will record the use time in the form of a red progress bar, reminding the user to replace it on schedule;

Liquid level detection-prevent overflow

Pvdf material float level switch, anti-corrosion and durable. Rechargeable liquid level alarm, one charge can be used for 6 months, no need to replace the battery.

U Secondary container-compliance with regulations

Various types of secondary containers to prevent spillage and leakage caused by dumping or damage during the collection, temporary storage, and transfer of hazardous chemical waste liquids, avoid secondary pollution, and comply with legal requirements.

Special Customization——Professional Service

can be customized according to customer needs and provide professional services

funnel waste liquid collection device

Funnel type waste liquid collection device is used for waste liquid collection during the experiment. The exhaust gas filter efficiently adsorbs harmful gases to protect the health of the experimenter. Rechargeable liquid level alarm to prevent liquid overflow. Various types of secondary containers prevent secondary pollution and meet regulatory requirements.

Double seal-prevent volatilization

The large-volume funnel is made of HDFE material, and the funnel capacity reaches 1 liter, which is convenient for dumping. Convenient buckle design can easily lock the double seal to prevent the liquid from volatilizing;

High efficiency filtration-protect the environment

According to the type of waste liquid, an organic waste gas filter and an acid waste gas filter can be selected to efficiently adsorb and filter the overflowing waste gas to protect the ambient air from being polluted. When starting to use, press the time start button on the filter, the time label will record the use time in the form of a red progress bar, reminding the user to replace it on schedule;

Liquid level detection-prevent overflow

PVDF material float type liquid level switch, anti-corrosion and durable. Rechargeable liquid level alarm, one charge can be used continuously for 6 months, no need to replace the battery.

Secondary container-compliance with regulations

Various types of secondary containers to prevent spillage and leakage during the collection, temporary storage and transfer of hazardous chemical waste liquids, avoid secondary pollution, and comply with legal requirements.

Special Customization——Professional Service

can be customized according to customer needs and provide professional services.

With the smooth implementation of the global green environment concept, we must not only pay attention to the environmental protection of the natural environment, but also pay attention to the environmental protection of the laboratory, and give you a clean laboratory environment to protect the health of laboratory personnel.