24-hour hot line:+86 189 1133 7382
GREEN  SAFETY  RELIABLE  EFFICIENT
sales@auwii.com
​​Committed to laboratory sample pretreatment and safety protection equipment R&D and manufacturing
Small rotary evaporator manufacturers
来源: | Author:AUWII | time :2020-12-16 | 1059 Browse: | 分享到:
In order to save valuable space in the laboratory fume hood, the products of small rotary evaporator manufacturers have been favored by more laboratory teachers. Purchasing a smaller rotary evaporator means that the utilization rate of laboratory space can be improved. A traditional rotary evaporator The instrument is composed of a motor, a distillation flask, a heating pot, a condenser tube, etc., and most of the products are designed with a horizontal rotating shaft, so that laboratory personnel may use multiple devices when conducting various distillation or concentration experiments. This is not only a serious waste of space, but also a very high purchase cost. Is there a small rotary evaporator that can process several samples at the same time and use it in a fume hood?

In order to save valuable space in the laboratory fume hood, the products of small rotary evaporator manufacturers have been favored by more laboratory teachers. Purchasing a smaller rotary evaporator means that the utilization rate of laboratory space can be improved. A traditional rotary evaporator The instrument is composed of a motor, a distillation flask, a heating pot, a condenser tube, etc., and most of the products are designed with a horizontal rotating shaft, so that laboratory personnel may use multiple devices when conducting various distillation or concentration experiments. This is not only a serious waste of space, but also a very high purchase cost. Is there a small rotary evaporator that can process several samples at the same time and use it in a fume hood?

The array rotary evaporator of Beijing Huaaowei is such a miraculous product. The array rotary evaporator is an innovative pre-processing equipment that can concentrate multiple samples at the same time. It consists of multiple miniRotar rotary evaporator units, vacuum systems, The solvent condensation recovery system is composed of multiple sample processing, and can greatly increase the utilization rate of laboratory space.


is equipped with multiple miniRotars, which can be used at the same time, but also supports independent operation. It can independently perform temperature setting, rotation speed adjustment, vacuum release and other operations without disturbing the normal operation of other rotary evaporator units.


Array Rotary Evaporator is not only small in size, but also rich in functions, which can meet all the needs of the laboratory for all concentration experiments of the rotary evaporator. Its main features are as follows:


Extreme mini-saving space

miniRotar innovatively adopts the longitudinal design of the rotating shaft, which reduces the product width to 25cm, which is one third of the width of the traditional rotary evaporator. The 1.8m standard fume hood can hold up to 5 miniRotars, which fully saves the space resources of the fume hood.


Array combination-improve efficiency

The special interface design of miniRotar allows multiple units to be used in parallel, a total of one vacuum system and condensation recovery system. It is very suitable for the simultaneous processing of multiple samples to improve work efficiency.


Each miniRotar can independently set the temperature, speed, time and other working parameters, and can independently raise and lower the sample bottle.


MiniRotar 500s has an independent quick release vacuum button, which can release the vacuum independently without affecting the normal operation of other miniRotars.


Regular work-reduce nursing

MiniRotar500s has the ability to work regularly. The working conditions and working time can be set according to experience. When the time is reached, the miniRotar500s will automatically stop rotating, release the vacuum, raise the sample bottle, and leave the heating water bath, automatically stop the evaporation and concentration of the sample.


Double protection-avoid pollution

miniRotar is equipped with a liquid backflow prevention interface, which can effectively prevent the liquid backflow in the pipeline when the vacuum is released, avoid contaminating the sample, and ensure the accuracy of the analysis results.


Three-stage condensation-reduce emissions

The eSR series solvent recovery instrument can meet the requirements of 6 miniRotar solvent vapor condensation recovery at the same time. The solvent recovery instrument adopts low-temperature compressor for refrigeration. After the solvent vapor enters, it is collected by three-stage condensation and liquefaction to achieve efficient condensation recovery (the recovery rate of methylene chloride vapor is better than 98%), reduce the emission of solvent vapor, protect the laboratory environment, and care for the health of the experimenters.


The eSR series solvent recovery instrument does not need to add any cooling circulating liquid, and does not need an external glass condenser, which reduces pipeline connections, does not require daily maintenance, and is simple to use.


The internal pipeline of eSR320s solvent recovery instrument has super anti-corrosion ability and can withstand high concentration of chloride ion.


If you also want to purchase a small rotary evaporator, then our array rotary evaporator can definitely meet your needs. As a professional laboratory equipment manufacturer, we will continue to manufacture more boutiques for major laboratories equipment.